[VOTE] Release Axis2 1.7.3

classic Classic list List threaded Threaded
10 messages Options
Reply | Threaded
Open this post in threaded view
|

[VOTE] Release Axis2 1.7.3

Andreas Veithen-2
This is a vote to release Apache Axis2 1.7.3.

SVN tag: http://svn.apache.org/repos/asf/axis/axis2/java/core/tags/v1.7.3/
Maven artifacts:
https://repository.apache.org/content/repositories/orgapacheaxis2-1009
Distributions: https://dist.apache.org/repos/dist/dev/axis/axis2/java/core/1.7.3/
Site: http://axis.apache.org/axis2/java/core-staging/

Here is my +1.

Andreas

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: [VOTE] Release Axis2 1.7.3

Deepal Jayasinghe-2
+1.

Deepal

> This is a vote to release Apache Axis2 1.7.3.
>
> SVN tag: http://svn.apache.org/repos/asf/axis/axis2/java/core/tags/v1.7.3/
> Maven artifacts:
> https://repository.apache.org/content/repositories/orgapacheaxis2-1009
> Distributions: https://dist.apache.org/repos/dist/dev/axis/axis2/java/core/1.7.3/
> Site: http://axis.apache.org/axis2/java/core-staging/
>
> Here is my +1.
>
> Andreas
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>
>


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

RE: [VOTE] Release Axis2 1.7.3

Martin Gainty
MG>quick comment tagged by MG

MG>found possible mis-config at 
\modules\kernel\target\test-resources\deployment\moduleDisEngegeRepo\axis2.xml:

 <testcase name="testGlobalCheck" classname="org.apache.axis2.deployment.ModuleDisengagementTest" time="1.011">
  
    <error message="The Dispatch phase is not found on the global InFlow phase of the axis2.xml file. 
    Make sure the phase is within the axis2.xml file." 
    type="org.apache.axis2.deployment.DeploymentException">org.apache.axis2.deployment.DeploymentException: 
    The Dispatch phase is not found on the global InFlow phase of the axis2.xml file. Make sure the phase is within the axis2.xml file.
    
at org.apache.axis2.deployment.util.PhasesInfo.getGlobalInflow(PhasesInfo.java:117)
at org.apache.axis2.engine.AxisConfiguration.validateSystemPredefinedPhases(AxisConfiguration.java:1360)
at org.apache.axis2.deployment.DeploymentEngine.loadRepository(DeploymentEngine.java:161)
at org.apache.axis2.deployment.FileSystemConfigurator.getAxisConfiguration(FileSystemConfigurator.java:135)
at org.apache.axis2.context.ConfigurationContextFactory.createConfigurationContext(ConfigurationContextFactory.java:64)
at org.apache.axis2.context.ConfigurationContextFactory.createConfigurationContextFromFileSystem(ConfigurationContextFactory.java:210)
at org.apache.axis2.deployment.ModuleDisengagementTest.setUp(ModuleDisengagementTest.java:48)

MG>\modules\kernel\target\test-resources\deployment\moduleDisEngegeRepo\axis2.xml contents contain:

<!--
  ~ Licensed to the Apache Software Foundation (ASF) under one
  ~ or more contributor license agreements. See the NOTICE file
  ~ distributed with this work for additional information
  ~ regarding copyright ownership. The ASF licenses this file
  ~ to you under the Apache License, Version 2.0 (the
  ~ "License"); you may not use this file except in compliance
  ~ with the License. You may obtain a copy of the License at
  ~
  ~ http://www.apache.org/licenses/LICENSE-2.0
  ~
  ~ Unless required by applicable law or agreed to in writing,
  ~ software distributed under the License is distributed on an
  ~ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
  ~ KIND, either express or implied. See the License for the
  ~ specific language governing permissions and limitations
  ~ under the License.
  -->

<axisconfig name="AxisJava2.0">
    <!-- ================================================= -->
    <!-- Parameters -->
    <!-- ================================================= -->
    <parameter name="hotdeployment">true</parameter>
    <parameter name="hotupdate">false</parameter>
    <parameter name="enableMTOM">false</parameter>

    <!--During a fault, stacktrace can be sent with the fault message. The following flag will control -->
    <!--that behaviour.-->
    <parameter name="sendStacktraceDetailsWithFaults">true</parameter>

    <!--If there aren't any information available to find out the fault reason, we set the message of the exception-->
    <!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be -->
    <!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag-->
    <!--is set then, Axis2 tries to get the first exception and set its message as the faultreason/Reason.-->
    <parameter name="DrillDownToRootCauseForFaultReason">false</parameter>

    <!--This is the user name and password of admin console-->
    <parameter name="userName">admin</parameter>
    <parameter name="password">axis2</parameter>

    <!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.-->
    <!--ServicesDirectory only works on the following cases-->
    <!---File based configurator and in that case the value should be a file URL (http:// not allowed)-->
    <!---When creating URL Based configurator with URL “file://”  -->
    <!--- War based configurator with expanded case , -->

    <!--All the other scenarios it will be ignored.-->
    <!--<parameter name="ServicesDirectory">service</parameter>-->
    <!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path-->
    <!--<parameter name="ModulesDirectory">modules</parameter>-->

    <!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context-->
    <!--root which can configured using the following contextRoot parameter-->
    <!--<parameter name="contextRoot">axis2</parameter>-->

    <!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distinguish those endpoints-->
    <!--<parameter name="servicePath">services</parameter>-->
    <!--<parameter name="restPath">rest</parameter>-->

    <!-- Following parameter will completely disable REST handling in Axis2-->
    <parameter name="disableREST" locked="true">false</parameter>

    <!-- ================================================= -->
    <!-- Deployers -->
    <!-- ================================================= -->

    <!--Service deployer , this will alow users to deploy AAR or exploded AAR as axis2 services-->
    <deployer extension=".aar" directory="services" class="org.apache.axis2.deployment.ServiceDeployer">
        <serviceBuilderExtension name ="jwsbuilderExt" class="org.apache.axis2.jaxws.framework.JAXWSServiceBuilderExtension"/>
        <serviceBuilderExtension name ="wsdlbuilderExt" class="org.apache.axis2.deployment.WSDLServiceBuilderExtension"/>
    </deployer>
    
    <!--POJO deployer , this will alow users to drop .class file and make that into a service-->
    <deployer extension=".class" directory="pojo" class="org.apache.axis2.deployment.POJODeployer"/>

    <!-- Following parameter will set the host name for the epr-->
    <!--<parameter name="hostname" locked="true">myhost.com</parameter>-->

    <!-- ================================================= -->
    <!-- Message Receivers -->
    <!-- ================================================= -->
    <!--This is the Default Message Receiver for the system , if you want to have MessageReceivers for -->
    <!--all the other MEP implement it and add the correct entry to here , so that you can refer from-->
    <!--any operation -->
    <!--Note : You can override this for particular service by adding the same element with your requirement-->
    <messageReceivers>
        <messageReceiver mep="http://www.w3.org/ns/wsdl/in-only"
                         class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
        <messageReceiver mep="http://www.w3.org/ns/wsdl/in-out"
                         class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>       
    </messageReceivers>

    <!-- ================================================= -->
    <!-- Message Formatter -->
    <!-- ================================================= -->
    <!--Following content type to message formatter mapping can be used to implement support for different message -->
    <!--format  serialization in Axis2. These message formats are expected to be resolved based on the content type. -->
    <messageFormatters>
        <messageFormatter contentType="application/x-www-form-urlencoded"
                         class="org.apache.axis2.transport.http.XFormURLEncodedFormatter"/>
        <messageFormatter contentType="multipart/form-data"
                         class="org.apache.axis2.transport.http.MultipartFormDataFormatter"/>
        <messageFormatter contentType="application/xml"
                         class="org.apache.axis2.transport.http.ApplicationXMLFormatter"/>
    </messageFormatters>

    <!-- ================================================= -->
    <!-- Message Builders -->
    <!-- ================================================= -->
    <!--Following content type to builder mapping can be used to implement support for different message -->
    <!--formats in Axis2. These message formats are expected to be resolved based on the content type. -->
    <messageBuilders>
        <messageBuilder contentType="application/xml"
                         class="org.apache.axis2.builder.ApplicationXMLBuilder"/>
        <messageBuilder contentType="application/x-www-form-urlencoded"
                         class="org.apache.axis2.builder.XFormURLEncodedBuilder"/>
        <!--Left commented because it adds the depandancy of servlet-api to other modules.
        Please uncomment to Receive messages in multipart/form-data format-->
        <!--<messageBuilder contentType="multipart/form-data"-->
                         <!--class="org.apache.axis2.builder.MultipartFormDataBuilder"/>-->
    </messageBuilders>

    <!-- ================================================= -->
    <!-- Target Resolvers -->
    <!-- ================================================= -->
    <!-- Uncomment the following and specify the class name for your TargetResolver to add -->
    <!-- a TargetResolver. TargetResolvers are used to process the To EPR for example to -->
    <!-- choose a server in a cluster -->
    <!--<targetResolvers>-->
    <!--<targetResolver />-->
    <!--</targetResolvers>-->

    <!--Uncomment if you want to have TCP transport support-->
    <!--<transportReceiver name="tcp"
                       class="org.apache.axis2.transport.tcp.TCPServer">
        <parameter name="port">6061</parameter>-->
        <!--If you want to give your own host address for EPR generation-->
        <!--uncomment following parameter , and set as you required.-->
        <!--<parameter name="hostname">tcp://myApp.com/ws</parameter>-->
    <!--</transportReceiver>-->

    <!-- ================================================= -->
    <!-- Transport Outs -->
    <!-- ================================================= -->

    <!--<transportSender name="java"-->
                     <!--class="org.apache.axis2.transport.java.JavaTransportSender"/>-->

    <!-- ================================================= -->
    <!--  SOAP Role Configuration                          -->
    <!-- ================================================= -->
    <!-- Use the following pattern to configure this axis2
         instance to act in particular roles. Note that in
         the absence of any configuration, Axis2 will act
         only in the ultimate receiver role -->
    <SOAPRoleConfiguration isUltimateReceiver="false">
    <role>http://my/custom/role</role>
    </SOAPRoleConfiguration>


    <!-- ================================================= -->
    <!-- Phases  -->
    <!-- ================================================= -->

<!-- MG apparently phase name='Dispatch' needs to be embedded in type='InFlow' -->

    <phaseOrder type="InFlow">
        <!--  System pre-defined phases       -->
         <phase name="Transport">
            <handler name="RequestURIBasedDispatcher"
                     class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher">
                <order phase="Transport"/>
            </handler>
            <handler name="SOAPActionBasedDispatcher"
                     class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher">
                <order phase="Transport"/>
            </handler>
         </phase>
        <phase name="Addressing">
            <handler name="AddressingBasedDispatcher"
                     class="org.apache.axis2.dispatchers.AddressingBasedDispatcher">
                <order phase="Addressing"/>
            </handler>
        </phase>
        <phase name="Security"/>
        <phase name="PreDispatch"/>

<!-- move this to inflow --->
        <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
            <handler name="RequestURIBasedDispatcher"
                     class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/>
            <handler name="SOAPActionBasedDispatcher"
                     class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/>
            <handler name="RequestURIOperationDispatcher"
                     class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/>
            <handler name="SOAPMessageBodyBasedDispatcher"
                     class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/>

            <handler name="HTTPLocationBasedDispatcher"
                     class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/>
        </phase>
        <phase name="RMPhase"/>
        <!--  System pre defined phases       -->
        <!--   After Postdispatch phase module author or or service author can add any phase he want      -->
        <phase name="OperationInPhase"/>
    </phaseOrder>
    <phaseOrder type="OutFlow">
        <!--      user can add his own phases to this area  -->
        <phase name="OperationOutPhase"/>
        <!--system predefined phase-->
        <!--these phase will run irrespective of the service-->
        <phase name="RMPhase"/>
        <phase name="PolicyDetermination"/>
        <phase name="MessageOut"/>
        <phase name="Security"/>
    </phaseOrder>
    <phaseOrder type="InFaultFlow">
        <phase name="Addressing">
             <handler name="AddressingBasedDispatcher"
                     class="org.apache.axis2.dispatchers.AddressingBasedDispatcher">
                 <order phase="Addressing"/>
            </handler>
        </phase>
        <phase name="Security"/>
        <phase name="PreDispatch"/>
        <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
            <handler name="RequestURIBasedDispatcher"
                     class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/>
            <handler name="SOAPActionBasedDispatcher"
                     class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/>
            <handler name="RequestURIOperationDispatcher"
                     class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/>
            <handler name="SOAPMessageBodyBasedDispatcher"
                     class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/>

            <handler name="HTTPLocationBasedDispatcher"
                     class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/>
        </phase>
        <phase name="RMPhase"/>
        <!--      user can add his own phases to this area  -->
        <phase name="OperationInFaultPhase"/>
    </phaseOrder>
    <phaseOrder type="OutFaultFlow">
        <!--      user can add his own phases to this area  -->
        <phase name="OperationOutFaultPhase"/>
        <phase name="RMPhase"/>
        <phase name="PolicyDetermination"/>
        <phase name="MessageOut"/>
    </phaseOrder>
</axisconfig>

MG>Please confirm axis2.xml mis-config 

?
Martin 
______________________________________________
                                                                                                   



> Subject: Re: [VOTE] Release Axis2 1.7.3

> To: [hidden email]
> From: [hidden email]
> Date: Mon, 30 May 2016 17:31:53 -0700
>
> +1.
>
> Deepal
> > This is a vote to release Apache Axis2 1.7.3.
> >
> > SVN tag: http://svn.apache.org/repos/asf/axis/axis2/java/core/tags/v1.7.3/
> > Maven artifacts:
> > https://repository.apache.org/content/repositories/orgapacheaxis2-1009
> > Distributions: https://dist.apache.org/repos/dist/dev/axis/axis2/java/core/1.7.3/
> > Site: http://axis.apache.org/axis2/java/core-staging/
> >
> > Here is my +1.
> >
> > Andreas
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: [hidden email]
> > For additional commands, e-mail: [hidden email]
> >
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>
Reply | Threaded
Open this post in threaded view
|

Re: [VOTE] Release Axis2 1.7.3

Andreas Veithen-2
That test works fine. If it breaks for you, then there is probably
something wrong with your environment.

Andreas

On Wed, Jun 1, 2016 at 12:59 PM, Martin Gainty <[hidden email]> wrote:

> MG>quick comment tagged by MG
>
> MG>found possible mis-config at
> \modules\kernel\target\test-resources\deployment\moduleDisEngegeRepo\axis2.xml:
>
>  <testcase name="testGlobalCheck"
> classname="org.apache.axis2.deployment.ModuleDisengagementTest"
> time="1.011">
>
>     <error message="The Dispatch phase is not found on the global InFlow
> phase of the axis2.xml file.
>     Make sure the phase is within the axis2.xml file."
>
> type="org.apache.axis2.deployment.DeploymentException">org.apache.axis2.deployment.DeploymentException:
>     The Dispatch phase is not found on the global InFlow phase of the
> axis2.xml file. Make sure the phase is within the axis2.xml file.
>
> at
> org.apache.axis2.deployment.util.PhasesInfo.getGlobalInflow(PhasesInfo.java:117)
> at
> org.apache.axis2.engine.AxisConfiguration.validateSystemPredefinedPhases(AxisConfiguration.java:1360)
> at
> org.apache.axis2.deployment.DeploymentEngine.loadRepository(DeploymentEngine.java:161)
> at
> org.apache.axis2.deployment.FileSystemConfigurator.getAxisConfiguration(FileSystemConfigurator.java:135)
> at
> org.apache.axis2.context.ConfigurationContextFactory.createConfigurationContext(ConfigurationContextFactory.java:64)
> at
> org.apache.axis2.context.ConfigurationContextFactory.createConfigurationContextFromFileSystem(ConfigurationContextFactory.java:210)
> at
> org.apache.axis2.deployment.ModuleDisengagementTest.setUp(ModuleDisengagementTest.java:48)
>
> MG>\modules\kernel\target\test-resources\deployment\moduleDisEngegeRepo\axis2.xml
> contents contain:
>
> <!--
>   ~ Licensed to the Apache Software Foundation (ASF) under one
>   ~ or more contributor license agreements. See the NOTICE file
>   ~ distributed with this work for additional information
>   ~ regarding copyright ownership. The ASF licenses this file
>   ~ to you under the Apache License, Version 2.0 (the
>   ~ "License"); you may not use this file except in compliance
>   ~ with the License. You may obtain a copy of the License at
>   ~
>   ~ http://www.apache.org/licenses/LICENSE-2.0
>   ~
>   ~ Unless required by applicable law or agreed to in writing,
>   ~ software distributed under the License is distributed on an
>   ~ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
>   ~ KIND, either express or implied. See the License for the
>   ~ specific language governing permissions and limitations
>   ~ under the License.
>   -->
>
> <axisconfig name="AxisJava2.0">
>     <!-- ================================================= -->
>     <!-- Parameters -->
>     <!-- ================================================= -->
>     <parameter name="hotdeployment">true</parameter>
>     <parameter name="hotupdate">false</parameter>
>     <parameter name="enableMTOM">false</parameter>
>
>     <!--During a fault, stacktrace can be sent with the fault message. The
> following flag will control -->
>     <!--that behaviour.-->
>     <parameter name="sendStacktraceDetailsWithFaults">true</parameter>
>
>     <!--If there aren't any information available to find out the fault
> reason, we set the message of the exception-->
>     <!--as the faultreason/Reason. But when a fault is thrown from a service
> or some where, it will be -->
>     <!--wrapped by different levels. Due to this the initial exception
> message can be lost. If this flag-->
>     <!--is set then, Axis2 tries to get the first exception and set its
> message as the faultreason/Reason.-->
>     <parameter name="DrillDownToRootCauseForFaultReason">false</parameter>
>
>     <!--This is the user name and password of admin console-->
>     <parameter name="userName">admin</parameter>
>     <parameter name="password">axis2</parameter>
>
>     <!--To override repository/services you need to uncomment following
> parameter and value SHOULD be absolute file path.-->
>     <!--ServicesDirectory only works on the following cases-->
>     <!---File based configurator and in that case the value should be a file
> URL (http:// not allowed)-->
>     <!---When creating URL Based configurator with URL “file://† -->
>     <!--- War based configurator with expanded case , -->
>
>     <!--All the other scenarios it will be ignored.-->
>     <!--<parameter name="ServicesDirectory">service</parameter>-->
>     <!--To override repository/modules you need to uncomment following
> parameter and value SHOULD be absolute file path-->
>     <!--<parameter name="ModulesDirectory">modules</parameter>-->
>
>     <!--Following params will set the proper context paths for invocations.
> All the endpoints will have a commons context-->
>     <!--root which can configured using the following contextRoot
> parameter-->
>     <!--<parameter name="contextRoot">axis2</parameter>-->
>
>     <!--Our HTTP endpoints can handle both REST and SOAP. Following
> parameters can be used to distinguish those endpoints-->
>     <!--<parameter name="servicePath">services</parameter>-->
>     <!--<parameter name="restPath">rest</parameter>-->
>
>     <!-- Following parameter will completely disable REST handling in
> Axis2-->
>     <parameter name="disableREST" locked="true">false</parameter>
>
>     <!-- ================================================= -->
>     <!-- Deployers -->
>     <!-- ================================================= -->
>
>     <!--Service deployer , this will alow users to deploy AAR or exploded
> AAR as axis2 services-->
>     <deployer extension=".aar" directory="services"
> class="org.apache.axis2.deployment.ServiceDeployer">
>         <serviceBuilderExtension name ="jwsbuilderExt"
> class="org.apache.axis2.jaxws.framework.JAXWSServiceBuilderExtension"/>
>         <serviceBuilderExtension name ="wsdlbuilderExt"
> class="org.apache.axis2.deployment.WSDLServiceBuilderExtension"/>
>     </deployer>
>
>     <!--POJO deployer , this will alow users to drop .class file and make
> that into a service-->
>     <deployer extension=".class" directory="pojo"
> class="org.apache.axis2.deployment.POJODeployer"/>
>
>     <!-- Following parameter will set the host name for the epr-->
>     <!--<parameter name="hostname" locked="true">myhost.com</parameter>-->
>
>     <!-- ================================================= -->
>     <!-- Message Receivers -->
>     <!-- ================================================= -->
>     <!--This is the Default Message Receiver for the system , if you want to
> have MessageReceivers for -->
>     <!--all the other MEP implement it and add the correct entry to here ,
> so that you can refer from-->
>     <!--any operation -->
>     <!--Note : You can override this for particular service by adding the
> same element with your requirement-->
>     <messageReceivers>
>         <messageReceiver mep="http://www.w3.org/ns/wsdl/in-only"
>
> class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
>         <messageReceiver mep="http://www.w3.org/ns/wsdl/in-out"
>
> class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
>     </messageReceivers>
>
>     <!-- ================================================= -->
>     <!-- Message Formatter -->
>     <!-- ================================================= -->
>     <!--Following content type to message formatter mapping can be used to
> implement support for different message -->
>     <!--format  serialization in Axis2. These message formats are expected
> to be resolved based on the content type. -->
>     <messageFormatters>
>         <messageFormatter contentType="application/x-www-form-urlencoded"
>
> class="org.apache.axis2.transport.http.XFormURLEncodedFormatter"/>
>         <messageFormatter contentType="multipart/form-data"
>
> class="org.apache.axis2.transport.http.MultipartFormDataFormatter"/>
>         <messageFormatter contentType="application/xml"
>
> class="org.apache.axis2.transport.http.ApplicationXMLFormatter"/>
>     </messageFormatters>
>
>     <!-- ================================================= -->
>     <!-- Message Builders -->
>     <!-- ================================================= -->
>     <!--Following content type to builder mapping can be used to implement
> support for different message -->
>     <!--formats in Axis2. These message formats are expected to be resolved
> based on the content type. -->
>     <messageBuilders>
>         <messageBuilder contentType="application/xml"
>
> class="org.apache.axis2.builder.ApplicationXMLBuilder"/>
>         <messageBuilder contentType="application/x-www-form-urlencoded"
>
> class="org.apache.axis2.builder.XFormURLEncodedBuilder"/>
>         <!--Left commented because it adds the depandancy of servlet-api to
> other modules.
>         Please uncomment to Receive messages in multipart/form-data
> format-->
>         <!--<messageBuilder contentType="multipart/form-data"-->
>
> <!--class="org.apache.axis2.builder.MultipartFormDataBuilder"/>-->
>     </messageBuilders>
>
>     <!-- ================================================= -->
>     <!-- Target Resolvers -->
>     <!-- ================================================= -->
>     <!-- Uncomment the following and specify the class name for your
> TargetResolver to add -->
>     <!-- a TargetResolver. TargetResolvers are used to process the To EPR
> for example to -->
>     <!-- choose a server in a cluster -->
>     <!--<targetResolvers>-->
>     <!--<targetResolver />-->
>     <!--</targetResolvers>-->
>
>     <!--Uncomment if you want to have TCP transport support-->
>     <!--<transportReceiver name="tcp"
>                        class="org.apache.axis2.transport.tcp.TCPServer">
>         <parameter name="port">6061</parameter>-->
>         <!--If you want to give your own host address for EPR generation-->
>         <!--uncomment following parameter , and set as you required.-->
>         <!--<parameter name="hostname">tcp://myApp.com/ws</parameter>-->
>     <!--</transportReceiver>-->
>
>     <!-- ================================================= -->
>     <!-- Transport Outs -->
>     <!-- ================================================= -->
>
>     <!--<transportSender name="java"-->
>
> <!--class="org.apache.axis2.transport.java.JavaTransportSender"/>-->
>
>     <!-- ================================================= -->
>     <!--  SOAP Role Configuration                          -->
>     <!-- ================================================= -->
>     <!-- Use the following pattern to configure this axis2
>          instance to act in particular roles. Note that in
>          the absence of any configuration, Axis2 will act
>          only in the ultimate receiver role -->
>     <SOAPRoleConfiguration isUltimateReceiver="false">
>     <role>http://my/custom/role</role>
>     </SOAPRoleConfiguration>
>
>
>     <!-- ================================================= -->
>     <!-- Phases  -->
>     <!-- ================================================= -->
>
> <!-- MG apparently phase name='Dispatch' needs to be embedded in
> type='InFlow' -->
>
>     <phaseOrder type="InFlow">
>         <!--  System pre-defined phases       -->
>          <phase name="Transport">
>             <handler name="RequestURIBasedDispatcher"
>
> class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher">
>                 <order phase="Transport"/>
>             </handler>
>             <handler name="SOAPActionBasedDispatcher"
>
> class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher">
>                 <order phase="Transport"/>
>             </handler>
>          </phase>
>         <phase name="Addressing">
>             <handler name="AddressingBasedDispatcher"
>
> class="org.apache.axis2.dispatchers.AddressingBasedDispatcher">
>                 <order phase="Addressing"/>
>             </handler>
>         </phase>
>         <phase name="Security"/>
>         <phase name="PreDispatch"/>
>
> <!-- move this to inflow --->
>         <phase name="Dispatch"
> class="org.apache.axis2.engine.DispatchPhase">
>             <handler name="RequestURIBasedDispatcher"
>
> class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/>
>             <handler name="SOAPActionBasedDispatcher"
>
> class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/>
>             <handler name="RequestURIOperationDispatcher"
>
> class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/>
>             <handler name="SOAPMessageBodyBasedDispatcher"
>
> class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/>
>
>             <handler name="HTTPLocationBasedDispatcher"
>
> class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/>
>         </phase>
>         <phase name="RMPhase"/>
>         <!--  System pre defined phases       -->
>         <!--   After Postdispatch phase module author or or service author
> can add any phase he want      -->
>         <phase name="OperationInPhase"/>
>     </phaseOrder>
>     <phaseOrder type="OutFlow">
>         <!--      user can add his own phases to this area  -->
>         <phase name="OperationOutPhase"/>
>         <!--system predefined phase-->
>         <!--these phase will run irrespective of the service-->
>         <phase name="RMPhase"/>
>         <phase name="PolicyDetermination"/>
>         <phase name="MessageOut"/>
>         <phase name="Security"/>
>     </phaseOrder>
>     <phaseOrder type="InFaultFlow">
>         <phase name="Addressing">
>              <handler name="AddressingBasedDispatcher"
>
> class="org.apache.axis2.dispatchers.AddressingBasedDispatcher">
>                  <order phase="Addressing"/>
>             </handler>
>         </phase>
>         <phase name="Security"/>
>         <phase name="PreDispatch"/>
>         <phase name="Dispatch"
> class="org.apache.axis2.engine.DispatchPhase">
>             <handler name="RequestURIBasedDispatcher"
>
> class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/>
>             <handler name="SOAPActionBasedDispatcher"
>
> class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/>
>             <handler name="RequestURIOperationDispatcher"
>
> class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/>
>             <handler name="SOAPMessageBodyBasedDispatcher"
>
> class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/>
>
>             <handler name="HTTPLocationBasedDispatcher"
>
> class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/>
>         </phase>
>         <phase name="RMPhase"/>
>         <!--      user can add his own phases to this area  -->
>         <phase name="OperationInFaultPhase"/>
>     </phaseOrder>
>     <phaseOrder type="OutFaultFlow">
>         <!--      user can add his own phases to this area  -->
>         <phase name="OperationOutFaultPhase"/>
>         <phase name="RMPhase"/>
>         <phase name="PolicyDetermination"/>
>         <phase name="MessageOut"/>
>     </phaseOrder>
> </axisconfig>
>
> MG>Please confirm axis2.xml mis-config
>
> ?
> Martin
> ______________________________________________
>
>
>
>
>
>
>> Subject: Re: [VOTE] Release Axis2 1.7.3
>> To: [hidden email]
>> From: [hidden email]
>> Date: Mon, 30 May 2016 17:31:53 -0700
>
>>
>> +1.
>>
>> Deepal
>> > This is a vote to release Apache Axis2 1.7.3.
>> >
>> > SVN tag:
>> > http://svn.apache.org/repos/asf/axis/axis2/java/core/tags/v1.7.3/
>> > Maven artifacts:
>> > https://repository.apache.org/content/repositories/orgapacheaxis2-1009
>> > Distributions:
>> > https://dist.apache.org/repos/dist/dev/axis/axis2/java/core/1.7.3/
>> > Site: http://axis.apache.org/axis2/java/core-staging/
>> >
>> > Here is my +1.
>> >
>> > Andreas
>> >
>> > ---------------------------------------------------------------------
>> > To unsubscribe, e-mail: [hidden email]
>> > For additional commands, e-mail: [hidden email]
>> >
>> >
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: [VOTE] Release Axis2 1.7.3

Deepal Jayasinghe-2
In reply to this post by Andreas Veithen-2
PMC, can you have a look at the artifacts and vote?

Deepal

> This is a vote to release Apache Axis2 1.7.3.
>
> SVN tag: http://svn.apache.org/repos/asf/axis/axis2/java/core/tags/v1.7.3/
> Maven artifacts:
> https://repository.apache.org/content/repositories/orgapacheaxis2-1009
> Distributions: https://dist.apache.org/repos/dist/dev/axis/axis2/java/core/1.7.3/
> Site: http://axis.apache.org/axis2/java/core-staging/
>
> Here is my +1.
>
> Andreas
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>
>


---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: [VOTE] Release Axis2 1.7.3

Sagara Gunathunga-2
In reply to this post by Andreas Veithen-2
+1 

Thanks ! 

On Mon, May 30, 2016 at 10:44 PM, Andreas Veithen <[hidden email]> wrote:
This is a vote to release Apache Axis2 1.7.3.

SVN tag: http://svn.apache.org/repos/asf/axis/axis2/java/core/tags/v1.7.3/
Maven artifacts:
https://repository.apache.org/content/repositories/orgapacheaxis2-1009
Distributions: https://dist.apache.org/repos/dist/dev/axis/axis2/java/core/1.7.3/
Site: http://axis.apache.org/axis2/java/core-staging/

Here is my +1.

Andreas

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]




--
Reply | Threaded
Open this post in threaded view
|

Re: [VOTE] Release Axis2 1.7.3

Shameera Rathnayaka
+1 

Thanks.
Shameera.

On Fri, Jun 3, 2016 at 10:36 AM Sagara Gunathunga <[hidden email]> wrote:
+1 

Thanks ! 

On Mon, May 30, 2016 at 10:44 PM, Andreas Veithen <[hidden email]> wrote:
This is a vote to release Apache Axis2 1.7.3.

SVN tag: http://svn.apache.org/repos/asf/axis/axis2/java/core/tags/v1.7.3/
Maven artifacts:
https://repository.apache.org/content/repositories/orgapacheaxis2-1009
Distributions: https://dist.apache.org/repos/dist/dev/axis/axis2/java/core/1.7.3/
Site: http://axis.apache.org/axis2/java/core-staging/

Here is my +1.

Andreas

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]




--
Shameera Rathnayaka
Reply | Threaded
Open this post in threaded view
|

Re: [VOTE] Release Axis2 1.7.3

Hiranya Jayathilaka-3
In reply to this post by Andreas Veithen-2
+1

Thanks,
Hiranya

> On May 30, 2016, at 10:14 AM, Andreas Veithen <[hidden email]> wrote:
>
> This is a vote to release Apache Axis2 1.7.3.
>
> SVN tag: http://svn.apache.org/repos/asf/axis/axis2/java/core/tags/v1.7.3/
> Maven artifacts:
> https://repository.apache.org/content/repositories/orgapacheaxis2-1009
> Distributions: https://dist.apache.org/repos/dist/dev/axis/axis2/java/core/1.7.3/
> Site: http://axis.apache.org/axis2/java/core-staging/
>
> Here is my +1.
>
> Andreas
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>

--
Hiranya Jayathilaka
Mayhem Lab/RACE Lab;
Dept. of Computer Science, UCSB;  http://cs.ucsb.edu
E-mail: [hidden email];  Mobile: +1 (805) 895-7443
Blog: http://techfeast-hiranya.blogspot.com







---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: [VOTE] Release Axis2 1.7.3

Kishanthan Thangarajah
In reply to this post by Andreas Veithen-2
+1

Thanks,
Kishanthan.

On Mon, May 30, 2016 at 10:44 PM, Andreas Veithen
<[hidden email]> wrote:

> This is a vote to release Apache Axis2 1.7.3.
>
> SVN tag: http://svn.apache.org/repos/asf/axis/axis2/java/core/tags/v1.7.3/
> Maven artifacts:
> https://repository.apache.org/content/repositories/orgapacheaxis2-1009
> Distributions: https://dist.apache.org/repos/dist/dev/axis/axis2/java/core/1.7.3/
> Site: http://axis.apache.org/axis2/java/core-staging/
>
> Here is my +1.
>
> Andreas
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: [VOTE] Release Axis2 1.7.3

Andreas Veithen-2
This vote has passed successfully. I will publish the release.

Andreas

On Fri, Jun 3, 2016 at 8:31 AM, Kishanthan Thangarajah
<[hidden email]> wrote:

> +1
>
> Thanks,
> Kishanthan.
>
> On Mon, May 30, 2016 at 10:44 PM, Andreas Veithen
> <[hidden email]> wrote:
>> This is a vote to release Apache Axis2 1.7.3.
>>
>> SVN tag: http://svn.apache.org/repos/asf/axis/axis2/java/core/tags/v1.7.3/
>> Maven artifacts:
>> https://repository.apache.org/content/repositories/orgapacheaxis2-1009
>> Distributions: https://dist.apache.org/repos/dist/dev/axis/axis2/java/core/1.7.3/
>> Site: http://axis.apache.org/axis2/java/core-staging/
>>
>> Here is my +1.
>>
>> Andreas
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [hidden email]
>> For additional commands, e-mail: [hidden email]
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [hidden email]
> For additional commands, e-mail: [hidden email]
>

---------------------------------------------------------------------
To unsubscribe, e-mail: [hidden email]
For additional commands, e-mail: [hidden email]