using faults w/ wsdl2c

classic Classic list List threaded Threaded
13 messages Options
Reply | Threaded
Open this post in threaded view
|

using faults w/ wsdl2c

Doug Price

I created a simple web service w/ Axis2c using wsdl2c on a WSDL file I created in Eclipse.  The default functionality of this works fine.  However, now I’d like to incorporate faults into my SOAP messages.  I created a fault type in my WSDL and wsdl2c creates the wrappers for the fault message, but the service skeleton and client stubs files seem to hard coded to assume no faults are ever sent / received.  For example, the client axis2_stub_op_*() function takes my request message type and returns my response message type, but doesn’t seem to account for my fault type.  Modifying the code, I can see that the fault is received and correctly deserialized, but I’ll have to continually hand edit the axis2_stub*.c and my client.c file as I make modifications to my WSDL in order to make this work.  

 

The same is true on the service side w/ the axis2_skel*() functions.  Am I missing something here, or are faults not supported w/ wsdl2c?

--
Doug Price
Research Director | Presagis

T. +1 972 943.2433 F. +1 469 467.4564 C. +1 469 867.8399


DISCLAIMER: This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and/or proprietary information. Do not read, copy, or disseminate this message unless you are the addressee. Any unauthorized review, use, disclosure or distribution is strictly prohibited. If you have received this message in error, please contact the sender by reply e-mail and delete the original and any copies from your system.


Reply | Threaded
Open this post in threaded view
|

Re: using faults w/ wsdl2c

Amir Mousavizadegan
Please see attached document
----- Original Message -----
From: "Doug Price" <[hidden email]>
To: <[hidden email]>
Sent: Monday, November 16, 2009 4:47 PM
Subject: using faults w/ wsdl2c


I created a simple web service w/ Axis2c using wsdl2c on a WSDL file I
created in Eclipse.  The default functionality of this works fine.  However,
now I'd like to incorporate faults into my SOAP messages.  I created a fault
type in my WSDL and wsdl2c creates the wrappers for the fault message, but
the service skeleton and client stubs files seem to hard coded to assume no
faults are ever sent / received.  For example, the client axis2_stub_op_*()
function takes my request message type and returns my response message type,
but doesn't seem to account for my fault type.  Modifying the code, I can
see that the fault is received and correctly deserialized, but I'll have to
continually hand edit the axis2_stub*.c and my client.c file as I make
modifications to my WSDL in order to make this work.

The same is true on the service side w/ the axis2_skel*() functions.  Am I
missing something here, or are faults not supported w/ wsdl2c?

--
Doug Price
Research Director | Presagis

T. +1 972 943.2433 F. +1 469 467.4564 C. +1 469 867.8399

DISCLAIMER: This e-mail message is for the sole use of the intended
recipient(s) and may contain confidential and/or proprietary information. Do
not read, copy, or disseminate this message unless you are the addressee.
Any unauthorized review, use, disclosure or distribution is strictly
prohibited. If you have received this message in error, please contact the
sender by reply e-mail and delete the original and any copies from your
system.


division.tar (189K) Download Attachment
Axis2SoapFault.pdf (462K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

RE: using faults w/ wsdl2c

Doug Price
Just what I was looking for.  Thanks so much.

A quick follow up question on the code though.  Is there a reason that axis2_svc_skel_Division_on_fault() doesn't use the adv_divFault api to create the fault?


--
Doug Price
Research Director | Presagis

T. +1 972 943.2433  F. +1 469 467.4564  C. +1 469 867.8399

DISCLAIMER: This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and/or proprietary information. Do not read, copy, or disseminate this message unless you are the addressee. Any unauthorized review, use, disclosure or distribution is strictly prohibited. If you have received this message in error, please contact the sender by reply e-mail and delete the original and any copies from your system.

-----Original Message-----

From: Amir Mousavizadegan [mailto:[hidden email]]
Sent: Tuesday, November 17, 2009 7:52 AM
To: Apache AXIS C User List
Subject: Re: using faults w/ wsdl2c

Please see attached document
----- Original Message -----
From: "Doug Price" <[hidden email]>
To: <[hidden email]>
Sent: Monday, November 16, 2009 4:47 PM
Subject: using faults w/ wsdl2c


I created a simple web service w/ Axis2c using wsdl2c on a WSDL file I
created in Eclipse.  The default functionality of this works fine.  However,
now I'd like to incorporate faults into my SOAP messages.  I created a fault
type in my WSDL and wsdl2c creates the wrappers for the fault message, but
the service skeleton and client stubs files seem to hard coded to assume no
faults are ever sent / received.  For example, the client axis2_stub_op_*()
function takes my request message type and returns my response message type,
but doesn't seem to account for my fault type.  Modifying the code, I can
see that the fault is received and correctly deserialized, but I'll have to
continually hand edit the axis2_stub*.c and my client.c file as I make
modifications to my WSDL in order to make this work.

The same is true on the service side w/ the axis2_skel*() functions.  Am I
missing something here, or are faults not supported w/ wsdl2c?

--
Doug Price
Research Director | Presagis

T. +1 972 943.2433 F. +1 469 467.4564 C. +1 469 867.8399

DISCLAIMER: This e-mail message is for the sole use of the intended
recipient(s) and may contain confidential and/or proprietary information. Do
not read, copy, or disseminate this message unless you are the addressee.
Any unauthorized review, use, disclosure or distribution is strictly
prohibited. If you have received this message in error, please contact the
sender by reply e-mail and delete the original and any copies from your
system.


Reply | Threaded
Open this post in threaded view
|

Re: using faults w/ wsdl2c

Amir Mousavizadegan
I did not write the sample codes  nor the document,  however  in order to
get it working, you have to change the body of the generated  code, or
create a replacement function as I did.
thx
Amir
----- Original Message -----
From: "Doug Price" <[hidden email]>
To: "Apache AXIS C User List" <[hidden email]>
Sent: Tuesday, November 17, 2009 11:05 AM
Subject: RE: using faults w/ wsdl2c


Just what I was looking for.  Thanks so much.

A quick follow up question on the code though.  Is there a reason that
axis2_svc_skel_Division_on_fault() doesn't use the adv_divFault api to
create the fault?


--
Doug Price
Research Director | Presagis

T. +1 972 943.2433  F. +1 469 467.4564  C. +1 469 867.8399

DISCLAIMER: This e-mail message is for the sole use of the intended
recipient(s) and may contain confidential and/or proprietary information. Do
not read, copy, or disseminate this message unless you are the addressee.
Any unauthorized review, use, disclosure or distribution is strictly
prohibited. If you have received this message in error, please contact the
sender by reply e-mail and delete the original and any copies from your
system.

-----Original Message-----

From: Amir Mousavizadegan [mailto:[hidden email]]
Sent: Tuesday, November 17, 2009 7:52 AM
To: Apache AXIS C User List
Subject: Re: using faults w/ wsdl2c

Please see attached document
----- Original Message -----
From: "Doug Price" <[hidden email]>
To: <[hidden email]>
Sent: Monday, November 16, 2009 4:47 PM
Subject: using faults w/ wsdl2c


I created a simple web service w/ Axis2c using wsdl2c on a WSDL file I
created in Eclipse.  The default functionality of this works fine.  However,
now I'd like to incorporate faults into my SOAP messages.  I created a fault
type in my WSDL and wsdl2c creates the wrappers for the fault message, but
the service skeleton and client stubs files seem to hard coded to assume no
faults are ever sent / received.  For example, the client axis2_stub_op_*()
function takes my request message type and returns my response message type,
but doesn't seem to account for my fault type.  Modifying the code, I can
see that the fault is received and correctly deserialized, but I'll have to
continually hand edit the axis2_stub*.c and my client.c file as I make
modifications to my WSDL in order to make this work.

The same is true on the service side w/ the axis2_skel*() functions.  Am I
missing something here, or are faults not supported w/ wsdl2c?

--
Doug Price
Research Director | Presagis

T. +1 972 943.2433 F. +1 469 467.4564 C. +1 469 867.8399

DISCLAIMER: This e-mail message is for the sole use of the intended
recipient(s) and may contain confidential and/or proprietary information. Do
not read, copy, or disseminate this message unless you are the addressee.
Any unauthorized review, use, disclosure or distribution is strictly
prohibited. If you have received this message in error, please contact the
sender by reply e-mail and delete the original and any copies from your
system.


Reply | Threaded
Open this post in threaded view
|

RE: using faults w/ wsdl2c

Doug Price
While I see that this approach allows the creation of user-defined fault types, is it possible to also use it to specify the standard SOAP-ENV:Fault?  I see a struct named axiom_soap_fault_t in the distribution, but I can't seem to return it from the axis2_svc_skel_*_on_fault() function because it requires a pointer to the SOAP body to create one.  Is there some other way to return a standard SOAP fault from a service?


--
Doug Price
Research Director | Presagis

T. +1 972 943.2433  F. +1 469 467.4564  C. +1 469 867.8399

DISCLAIMER: This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and/or proprietary information. Do not read, copy, or disseminate this message unless you are the addressee. Any unauthorized review, use, disclosure or distribution is strictly prohibited. If you have received this message in error, please contact the sender by reply e-mail and delete the original and any copies from your system.

-----Original Message-----

From: Amir Mousavizadegan [mailto:[hidden email]]
Sent: Tuesday, November 17, 2009 10:29 AM
To: Apache AXIS C User List
Subject: Re: using faults w/ wsdl2c

I did not write the sample codes  nor the document,  however  in order to
get it working, you have to change the body of the generated  code, or
create a replacement function as I did.
thx
Amir
----- Original Message -----
From: "Doug Price" <[hidden email]>
To: "Apache AXIS C User List" <[hidden email]>
Sent: Tuesday, November 17, 2009 11:05 AM
Subject: RE: using faults w/ wsdl2c


Just what I was looking for.  Thanks so much.

A quick follow up question on the code though.  Is there a reason that
axis2_svc_skel_Division_on_fault() doesn't use the adv_divFault api to
create the fault?


--
Doug Price
Research Director | Presagis

T. +1 972 943.2433  F. +1 469 467.4564  C. +1 469 867.8399

DISCLAIMER: This e-mail message is for the sole use of the intended
recipient(s) and may contain confidential and/or proprietary information. Do
not read, copy, or disseminate this message unless you are the addressee.
Any unauthorized review, use, disclosure or distribution is strictly
prohibited. If you have received this message in error, please contact the
sender by reply e-mail and delete the original and any copies from your
system.

-----Original Message-----

From: Amir Mousavizadegan [mailto:[hidden email]]
Sent: Tuesday, November 17, 2009 7:52 AM
To: Apache AXIS C User List
Subject: Re: using faults w/ wsdl2c

Please see attached document
----- Original Message -----
From: "Doug Price" <[hidden email]>
To: <[hidden email]>
Sent: Monday, November 16, 2009 4:47 PM
Subject: using faults w/ wsdl2c


I created a simple web service w/ Axis2c using wsdl2c on a WSDL file I
created in Eclipse.  The default functionality of this works fine.  However,
now I'd like to incorporate faults into my SOAP messages.  I created a fault
type in my WSDL and wsdl2c creates the wrappers for the fault message, but
the service skeleton and client stubs files seem to hard coded to assume no
faults are ever sent / received.  For example, the client axis2_stub_op_*()
function takes my request message type and returns my response message type,
but doesn't seem to account for my fault type.  Modifying the code, I can
see that the fault is received and correctly deserialized, but I'll have to
continually hand edit the axis2_stub*.c and my client.c file as I make
modifications to my WSDL in order to make this work.

The same is true on the service side w/ the axis2_skel*() functions.  Am I
missing something here, or are faults not supported w/ wsdl2c?

--
Doug Price
Research Director | Presagis

T. +1 972 943.2433 F. +1 469 467.4564 C. +1 469 867.8399

DISCLAIMER: This e-mail message is for the sole use of the intended
recipient(s) and may contain confidential and/or proprietary information. Do
not read, copy, or disseminate this message unless you are the addressee.
Any unauthorized review, use, disclosure or distribution is strictly
prohibited. If you have received this message in error, please contact the
sender by reply e-mail and delete the original and any copies from your
system.



Reply | Threaded
Open this post in threaded view
|

Re: using faults w/ wsdl2c

Dimuthu Gamage
Hi,

If you use the latest axis2 WSDL2C generator code, you don't need to create soap fault message manually as the generated code provide lot of support in generating fault message.

Please have a look at this for the improved API, http://www.dimuthu.org/blog/2009/02/09/code-generate-custom-soap-faults-for-axis2c/


Thanks
Dimuthu


On Wed, Nov 18, 2009 at 3:49 AM, Doug Price <[hidden email]> wrote:
While I see that this approach allows the creation of user-defined fault types, is it possible to also use it to specify the standard SOAP-ENV:Fault?  I see a struct named axiom_soap_fault_t in the distribution, but I can't seem to return it from the axis2_svc_skel_*_on_fault() function because it requires a pointer to the SOAP body to create one.  Is there some other way to return a standard SOAP fault from a service?


--
Doug Price
Research Director | Presagis

T. +1 972 943.2433  F. +1 469 467.4564  C. +1 469 867.8399

DISCLAIMER: This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and/or proprietary information. Do not read, copy, or disseminate this message unless you are the addressee. Any unauthorized review, use, disclosure or distribution is strictly prohibited. If you have received this message in error, please contact the sender by reply e-mail and delete the original and any copies from your system.

-----Original Message-----

From: Amir Mousavizadegan [mailto:[hidden email]]
Sent: Tuesday, November 17, 2009 10:29 AM
To: Apache AXIS C User List
Subject: Re: using faults w/ wsdl2c

I did not write the sample codes  nor the document,  however  in order to
get it working, you have to change the body of the generated  code, or
create a replacement function as I did.
thx
Amir
----- Original Message -----
From: "Doug Price" <[hidden email]>
To: "Apache AXIS C User List" <[hidden email]>
Sent: Tuesday, November 17, 2009 11:05 AM
Subject: RE: using faults w/ wsdl2c


Just what I was looking for.  Thanks so much.

A quick follow up question on the code though.  Is there a reason that
axis2_svc_skel_Division_on_fault() doesn't use the adv_divFault api to
create the fault?


--
Doug Price
Research Director | Presagis

T. +1 972 943.2433  F. +1 469 467.4564  C. +1 469 867.8399

DISCLAIMER: This e-mail message is for the sole use of the intended
recipient(s) and may contain confidential and/or proprietary information. Do
not read, copy, or disseminate this message unless you are the addressee.
Any unauthorized review, use, disclosure or distribution is strictly
prohibited. If you have received this message in error, please contact the
sender by reply e-mail and delete the original and any copies from your
system.

-----Original Message-----

From: Amir Mousavizadegan [mailto:[hidden email]]
Sent: Tuesday, November 17, 2009 7:52 AM
To: Apache AXIS C User List
Subject: Re: using faults w/ wsdl2c

Please see attached document
----- Original Message -----
From: "Doug Price" <[hidden email]>
To: <[hidden email]>
Sent: Monday, November 16, 2009 4:47 PM
Subject: using faults w/ wsdl2c


I created a simple web service w/ Axis2c using wsdl2c on a WSDL file I
created in Eclipse.  The default functionality of this works fine.  However,
now I'd like to incorporate faults into my SOAP messages.  I created a fault
type in my WSDL and wsdl2c creates the wrappers for the fault message, but
the service skeleton and client stubs files seem to hard coded to assume no
faults are ever sent / received.  For example, the client axis2_stub_op_*()
function takes my request message type and returns my response message type,
but doesn't seem to account for my fault type.  Modifying the code, I can
see that the fault is received and correctly deserialized, but I'll have to
continually hand edit the axis2_stub*.c and my client.c file as I make
modifications to my WSDL in order to make this work.

The same is true on the service side w/ the axis2_skel*() functions.  Am I
missing something here, or are faults not supported w/ wsdl2c?

--
Doug Price
Research Director | Presagis

T. +1 972 943.2433 F. +1 469 467.4564 C. +1 469 867.8399

DISCLAIMER: This e-mail message is for the sole use of the intended
recipient(s) and may contain confidential and/or proprietary information. Do
not read, copy, or disseminate this message unless you are the addressee.
Any unauthorized review, use, disclosure or distribution is strictly
prohibited. If you have received this message in error, please contact the
sender by reply e-mail and delete the original and any copies from your
system.






--
Thanks,
Dimuthu Gamage

http://www.dimuthu.org
http://www.wso2.org
Reply | Threaded
Open this post in threaded view
|

Re: using faults w/ wsdl2c

Sam Carleton
Dimuthu,

Where EXACTLY does one find the latest WSDL2C code?  Is it in an build or is it in the Axis2/Java SVN repository?

Sam

On Thu, Dec 3, 2009 at 10:57 PM, Dimuthu Gamage <[hidden email]> wrote:
Hi,

If you use the latest axis2 WSDL2C generator code, you don't need to create soap fault message manually as the generated code provide lot of support in generating fault message.

Please have a look at this for the improved API, http://www.dimuthu.org/blog/2009/02/09/code-generate-custom-soap-faults-for-axis2c/


Thanks
Dimuthu



On Wed, Nov 18, 2009 at 3:49 AM, Doug Price <[hidden email]> wrote:
While I see that this approach allows the creation of user-defined fault types, is it possible to also use it to specify the standard SOAP-ENV:Fault?  I see a struct named axiom_soap_fault_t in the distribution, but I can't seem to return it from the axis2_svc_skel_*_on_fault() function because it requires a pointer to the SOAP body to create one.  Is there some other way to return a standard SOAP fault from a service?


--
Doug Price
Research Director | Presagis

T. +1 972 943.2433  F. +1 469 467.4564  C. +1 469 867.8399

DISCLAIMER: This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and/or proprietary information. Do not read, copy, or disseminate this message unless you are the addressee. Any unauthorized review, use, disclosure or distribution is strictly prohibited. If you have received this message in error, please contact the sender by reply e-mail and delete the original and any copies from your system.

-----Original Message-----

From: Amir Mousavizadegan [mailto:[hidden email]]
Sent: Tuesday, November 17, 2009 10:29 AM
To: Apache AXIS C User List
Subject: Re: using faults w/ wsdl2c

I did not write the sample codes  nor the document,  however  in order to
get it working, you have to change the body of the generated  code, or
create a replacement function as I did.
thx
Amir
----- Original Message -----
From: "Doug Price" <[hidden email]>
To: "Apache AXIS C User List" <[hidden email]>
Sent: Tuesday, November 17, 2009 11:05 AM
Subject: RE: using faults w/ wsdl2c


Just what I was looking for.  Thanks so much.

A quick follow up question on the code though.  Is there a reason that
axis2_svc_skel_Division_on_fault() doesn't use the adv_divFault api to
create the fault?


--
Doug Price
Research Director | Presagis

T. +1 972 943.2433  F. +1 469 467.4564  C. +1 469 867.8399

DISCLAIMER: This e-mail message is for the sole use of the intended
recipient(s) and may contain confidential and/or proprietary information. Do
not read, copy, or disseminate this message unless you are the addressee.
Any unauthorized review, use, disclosure or distribution is strictly
prohibited. If you have received this message in error, please contact the
sender by reply e-mail and delete the original and any copies from your
system.

-----Original Message-----

From: Amir Mousavizadegan [mailto:[hidden email]]
Sent: Tuesday, November 17, 2009 7:52 AM
To: Apache AXIS C User List
Subject: Re: using faults w/ wsdl2c

Please see attached document
----- Original Message -----
From: "Doug Price" <[hidden email]>
To: <[hidden email]>
Sent: Monday, November 16, 2009 4:47 PM
Subject: using faults w/ wsdl2c


I created a simple web service w/ Axis2c using wsdl2c on a WSDL file I
created in Eclipse.  The default functionality of this works fine.  However,
now I'd like to incorporate faults into my SOAP messages.  I created a fault
type in my WSDL and wsdl2c creates the wrappers for the fault message, but
the service skeleton and client stubs files seem to hard coded to assume no
faults are ever sent / received.  For example, the client axis2_stub_op_*()
function takes my request message type and returns my response message type,
but doesn't seem to account for my fault type.  Modifying the code, I can
see that the fault is received and correctly deserialized, but I'll have to
continually hand edit the axis2_stub*.c and my client.c file as I make
modifications to my WSDL in order to make this work.

The same is true on the service side w/ the axis2_skel*() functions.  Am I
missing something here, or are faults not supported w/ wsdl2c?

--
Doug Price
Research Director | Presagis

T. +1 972 943.2433 F. +1 469 467.4564 C. +1 469 867.8399

DISCLAIMER: This e-mail message is for the sole use of the intended
recipient(s) and may contain confidential and/or proprietary information. Do
not read, copy, or disseminate this message unless you are the addressee.
Any unauthorized review, use, disclosure or distribution is strictly
prohibited. If you have received this message in error, please contact the
sender by reply e-mail and delete the original and any copies from your
system.







Reply | Threaded
Open this post in threaded view
|

Re: using faults w/ wsdl2c

Samisa Abeysinghe-4


On Fri, Dec 4, 2009 at 11:09 PM, Sam Carleton <[hidden email]> wrote:
Dimuthu,

Where EXACTLY does one find the latest WSDL2C code?  Is it in an build or is it in the Axis2/Java SVN repository?

Axis2 svn.

Samisa...
 

Sam


On Thu, Dec 3, 2009 at 10:57 PM, Dimuthu Gamage <[hidden email]> wrote:
Hi,

If you use the latest axis2 WSDL2C generator code, you don't need to create soap fault message manually as the generated code provide lot of support in generating fault message.

Please have a look at this for the improved API, http://www.dimuthu.org/blog/2009/02/09/code-generate-custom-soap-faults-for-axis2c/


Thanks
Dimuthu



On Wed, Nov 18, 2009 at 3:49 AM, Doug Price <[hidden email]> wrote:
While I see that this approach allows the creation of user-defined fault types, is it possible to also use it to specify the standard SOAP-ENV:Fault?  I see a struct named axiom_soap_fault_t in the distribution, but I can't seem to return it from the axis2_svc_skel_*_on_fault() function because it requires a pointer to the SOAP body to create one.  Is there some other way to return a standard SOAP fault from a service?


--
Doug Price
Research Director | Presagis

T. +1 972 943.2433  F. +1 469 467.4564  C. +1 469 867.8399

DISCLAIMER: This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and/or proprietary information. Do not read, copy, or disseminate this message unless you are the addressee. Any unauthorized review, use, disclosure or distribution is strictly prohibited. If you have received this message in error, please contact the sender by reply e-mail and delete the original and any copies from your system.

-----Original Message-----

From: Amir Mousavizadegan [mailto:[hidden email]]
Sent: Tuesday, November 17, 2009 10:29 AM
To: Apache AXIS C User List
Subject: Re: using faults w/ wsdl2c

I did not write the sample codes  nor the document,  however  in order to
get it working, you have to change the body of the generated  code, or
create a replacement function as I did.
thx
Amir
----- Original Message -----
From: "Doug Price" <[hidden email]>
To: "Apache AXIS C User List" <[hidden email]>
Sent: Tuesday, November 17, 2009 11:05 AM
Subject: RE: using faults w/ wsdl2c


Just what I was looking for.  Thanks so much.

A quick follow up question on the code though.  Is there a reason that
axis2_svc_skel_Division_on_fault() doesn't use the adv_divFault api to
create the fault?


--
Doug Price
Research Director | Presagis

T. +1 972 943.2433  F. +1 469 467.4564  C. +1 469 867.8399

DISCLAIMER: This e-mail message is for the sole use of the intended
recipient(s) and may contain confidential and/or proprietary information. Do
not read, copy, or disseminate this message unless you are the addressee.
Any unauthorized review, use, disclosure or distribution is strictly
prohibited. If you have received this message in error, please contact the
sender by reply e-mail and delete the original and any copies from your
system.

-----Original Message-----

From: Amir Mousavizadegan [mailto:[hidden email]]
Sent: Tuesday, November 17, 2009 7:52 AM
To: Apache AXIS C User List
Subject: Re: using faults w/ wsdl2c

Please see attached document
----- Original Message -----
From: "Doug Price" <[hidden email]>
To: <[hidden email]>
Sent: Monday, November 16, 2009 4:47 PM
Subject: using faults w/ wsdl2c


I created a simple web service w/ Axis2c using wsdl2c on a WSDL file I
created in Eclipse.  The default functionality of this works fine.  However,
now I'd like to incorporate faults into my SOAP messages.  I created a fault
type in my WSDL and wsdl2c creates the wrappers for the fault message, but
the service skeleton and client stubs files seem to hard coded to assume no
faults are ever sent / received.  For example, the client axis2_stub_op_*()
function takes my request message type and returns my response message type,
but doesn't seem to account for my fault type.  Modifying the code, I can
see that the fault is received and correctly deserialized, but I'll have to
continually hand edit the axis2_stub*.c and my client.c file as I make
modifications to my WSDL in order to make this work.

The same is true on the service side w/ the axis2_skel*() functions.  Am I
missing something here, or are faults not supported w/ wsdl2c?

--
Doug Price
Research Director | Presagis

T. +1 972 943.2433 F. +1 469 467.4564 C. +1 469 867.8399

DISCLAIMER: This e-mail message is for the sole use of the intended
recipient(s) and may contain confidential and/or proprietary information. Do
not read, copy, or disseminate this message unless you are the addressee.
Any unauthorized review, use, disclosure or distribution is strictly
prohibited. If you have received this message in error, please contact the
sender by reply e-mail and delete the original and any copies from your
system.










--
Samisa Abeysinghe
Director, Engineering - WSO2 Inc.

http://www.wso2.com/ - "The Open Source SOA Company"
Reply | Threaded
Open this post in threaded view
|

Re: using faults w/ wsdl2c

Dimuthu Gamage


On Sat, Dec 5, 2009 at 5:56 AM, Samisa Abeysinghe <[hidden email]> wrote:


On Fri, Dec 4, 2009 at 11:09 PM, Sam Carleton <[hidden email]> wrote:
Dimuthu,

Where EXACTLY does one find the latest WSDL2C code?  Is it in an build or is it in the Axis2/Java SVN repository?

Hi,

In fact right now we are not maintaining an Axis2 nightly build. So you have to do your own build of Axis2/Java to get the latest WSDL2C code.

Thanks
Dimuthu
 
Axis2 svn.

Samisa...
 

Sam


On Thu, Dec 3, 2009 at 10:57 PM, Dimuthu Gamage <[hidden email]> wrote:
Hi,

If you use the latest axis2 WSDL2C generator code, you don't need to create soap fault message manually as the generated code provide lot of support in generating fault message.

Please have a look at this for the improved API, http://www.dimuthu.org/blog/2009/02/09/code-generate-custom-soap-faults-for-axis2c/


Thanks
Dimuthu



On Wed, Nov 18, 2009 at 3:49 AM, Doug Price <[hidden email]> wrote:
While I see that this approach allows the creation of user-defined fault types, is it possible to also use it to specify the standard SOAP-ENV:Fault?  I see a struct named axiom_soap_fault_t in the distribution, but I can't seem to return it from the axis2_svc_skel_*_on_fault() function because it requires a pointer to the SOAP body to create one.  Is there some other way to return a standard SOAP fault from a service?


--
Doug Price
Research Director | Presagis

T. +1 972 943.2433  F. +1 469 467.4564  C. +1 469 867.8399

DISCLAIMER: This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and/or proprietary information. Do not read, copy, or disseminate this message unless you are the addressee. Any unauthorized review, use, disclosure or distribution is strictly prohibited. If you have received this message in error, please contact the sender by reply e-mail and delete the original and any copies from your system.

-----Original Message-----

From: Amir Mousavizadegan [mailto:[hidden email]]
Sent: Tuesday, November 17, 2009 10:29 AM
To: Apache AXIS C User List
Subject: Re: using faults w/ wsdl2c

I did not write the sample codes  nor the document,  however  in order to
get it working, you have to change the body of the generated  code, or
create a replacement function as I did.
thx
Amir
----- Original Message -----
From: "Doug Price" <[hidden email]>
To: "Apache AXIS C User List" <[hidden email]>
Sent: Tuesday, November 17, 2009 11:05 AM
Subject: RE: using faults w/ wsdl2c


Just what I was looking for.  Thanks so much.

A quick follow up question on the code though.  Is there a reason that
axis2_svc_skel_Division_on_fault() doesn't use the adv_divFault api to
create the fault?


--
Doug Price
Research Director | Presagis

T. +1 972 943.2433  F. +1 469 467.4564  C. +1 469 867.8399

DISCLAIMER: This e-mail message is for the sole use of the intended
recipient(s) and may contain confidential and/or proprietary information. Do
not read, copy, or disseminate this message unless you are the addressee.
Any unauthorized review, use, disclosure or distribution is strictly
prohibited. If you have received this message in error, please contact the
sender by reply e-mail and delete the original and any copies from your
system.

-----Original Message-----

From: Amir Mousavizadegan [mailto:[hidden email]]
Sent: Tuesday, November 17, 2009 7:52 AM
To: Apache AXIS C User List
Subject: Re: using faults w/ wsdl2c

Please see attached document
----- Original Message -----
From: "Doug Price" <[hidden email]>
To: <[hidden email]>
Sent: Monday, November 16, 2009 4:47 PM
Subject: using faults w/ wsdl2c


I created a simple web service w/ Axis2c using wsdl2c on a WSDL file I
created in Eclipse.  The default functionality of this works fine.  However,
now I'd like to incorporate faults into my SOAP messages.  I created a fault
type in my WSDL and wsdl2c creates the wrappers for the fault message, but
the service skeleton and client stubs files seem to hard coded to assume no
faults are ever sent / received.  For example, the client axis2_stub_op_*()
function takes my request message type and returns my response message type,
but doesn't seem to account for my fault type.  Modifying the code, I can
see that the fault is received and correctly deserialized, but I'll have to
continually hand edit the axis2_stub*.c and my client.c file as I make
modifications to my WSDL in order to make this work.

The same is true on the service side w/ the axis2_skel*() functions.  Am I
missing something here, or are faults not supported w/ wsdl2c?

--
Doug Price
Research Director | Presagis

T. +1 972 943.2433 F. +1 469 467.4564 C. +1 469 867.8399

DISCLAIMER: This e-mail message is for the sole use of the intended
recipient(s) and may contain confidential and/or proprietary information. Do
not read, copy, or disseminate this message unless you are the addressee.
Any unauthorized review, use, disclosure or distribution is strictly
prohibited. If you have received this message in error, please contact the
sender by reply e-mail and delete the original and any copies from your
system.










--
Samisa Abeysinghe
Director, Engineering - WSO2 Inc.

http://www.wso2.com/ - "The Open Source SOA Company"



--
Thanks,
Dimuthu Gamage

http://www.dimuthu.org
http://www.wso2.org
Reply | Threaded
Open this post in threaded view
|

Re: using faults w/ wsdl2c

Sam Carleton
Ok, I am trying to figure out to use faults with Axis2/C.  There was a thread back in December that said there is some new features in the "latest axis2 WSDL2C generator code".  Is my understanding that on this mailing list when folks refer to axis2, they mean axis2/java not axis2/c, correct?

At this time are there binaries for the latest axis2 WSDL2C generator code or does one still need to go to the nightly build to get it?

It looks to me like the nightly build can be found in the following SVN repository: 


When I try to use TortoiseSVN 1.6.1 to check out the code, I get the following error:

Repository moved permanently to '/viewvc/webservices/axis2/trunk/java/'; please relocate

Any thoughts on what the problem is?

Sam

On Tue, Dec 15, 2009 at 3:32 PM, Dimuthu Gamage <[hidden email]> wrote:


On Sat, Dec 5, 2009 at 5:56 AM, Samisa Abeysinghe <[hidden email]> wrote:


On Fri, Dec 4, 2009 at 11:09 PM, Sam Carleton <[hidden email]> wrote:
Dimuthu,

Where EXACTLY does one find the latest WSDL2C code?  Is it in an build or is it in the Axis2/Java SVN repository?

Hi,

In fact right now we are not maintaining an Axis2 nightly build. So you have to do your own build of Axis2/Java to get the latest WSDL2C code.

Thanks
Dimuthu
 
Axis2 svn.

Samisa...
 

Sam


On Thu, Dec 3, 2009 at 10:57 PM, Dimuthu Gamage <[hidden email]> wrote:
Hi,

If you use the latest axis2 WSDL2C generator code, you don't need to create soap fault message manually as the generated code provide lot of support in generating fault message.

Please have a look at this for the improved API, http://www.dimuthu.org/blog/2009/02/09/code-generate-custom-soap-faults-for-axis2c/


Thanks
Dimuthu



On Wed, Nov 18, 2009 at 3:49 AM, Doug Price <[hidden email]> wrote:
While I see that this approach allows the creation of user-defined fault types, is it possible to also use it to specify the standard SOAP-ENV:Fault?  I see a struct named axiom_soap_fault_t in the distribution, but I can't seem to return it from the axis2_svc_skel_*_on_fault() function because it requires a pointer to the SOAP body to create one.  Is there some other way to return a standard SOAP fault from a service?


--
Doug Price
Research Director | Presagis

T. +1 972 943.2433  F. +1 469 467.4564  C. +1 469 867.8399

DISCLAIMER: This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and/or proprietary information. Do not read, copy, or disseminate this message unless you are the addressee. Any unauthorized review, use, disclosure or distribution is strictly prohibited. If you have received this message in error, please contact the sender by reply e-mail and delete the original and any copies from your system.

-----Original Message-----

From: Amir Mousavizadegan [mailto:[hidden email]]
Sent: Tuesday, November 17, 2009 10:29 AM
To: Apache AXIS C User List
Subject: Re: using faults w/ wsdl2c

I did not write the sample codes  nor the document,  however  in order to
get it working, you have to change the body of the generated  code, or
create a replacement function as I did.
thx
Amir
----- Original Message -----
From: "Doug Price" <[hidden email]>
To: "Apache AXIS C User List" <[hidden email]>
Sent: Tuesday, November 17, 2009 11:05 AM
Subject: RE: using faults w/ wsdl2c


Just what I was looking for.  Thanks so much.

A quick follow up question on the code though.  Is there a reason that
axis2_svc_skel_Division_on_fault() doesn't use the adv_divFault api to
create the fault?


--
Doug Price
Research Director | Presagis

T. +1 972 943.2433  F. +1 469 467.4564  C. +1 469 867.8399

DISCLAIMER: This e-mail message is for the sole use of the intended
recipient(s) and may contain confidential and/or proprietary information. Do
not read, copy, or disseminate this message unless you are the addressee.
Any unauthorized review, use, disclosure or distribution is strictly
prohibited. If you have received this message in error, please contact the
sender by reply e-mail and delete the original and any copies from your
system.

-----Original Message-----

From: Amir Mousavizadegan [mailto:[hidden email]]
Sent: Tuesday, November 17, 2009 7:52 AM
To: Apache AXIS C User List
Subject: Re: using faults w/ wsdl2c

Please see attached document
----- Original Message -----
From: "Doug Price" <[hidden email]>
To: <[hidden email]>
Sent: Monday, November 16, 2009 4:47 PM
Subject: using faults w/ wsdl2c


I created a simple web service w/ Axis2c using wsdl2c on a WSDL file I
created in Eclipse.  The default functionality of this works fine.  However,
now I'd like to incorporate faults into my SOAP messages.  I created a fault
type in my WSDL and wsdl2c creates the wrappers for the fault message, but
the service skeleton and client stubs files seem to hard coded to assume no
faults are ever sent / received.  For example, the client axis2_stub_op_*()
function takes my request message type and returns my response message type,
but doesn't seem to account for my fault type.  Modifying the code, I can
see that the fault is received and correctly deserialized, but I'll have to
continually hand edit the axis2_stub*.c and my client.c file as I make
modifications to my WSDL in order to make this work.

The same is true on the service side w/ the axis2_skel*() functions.  Am I
missing something here, or are faults not supported w/ wsdl2c?

--
Doug Price
Research Director | Presagis

T. +1 972 943.2433 F. +1 469 467.4564 C. +1 469 867.8399

DISCLAIMER: This e-mail message is for the sole use of the intended
recipient(s) and may contain confidential and/or proprietary information. Do
not read, copy, or disseminate this message unless you are the addressee.
Any unauthorized review, use, disclosure or distribution is strictly
prohibited. If you have received this message in error, please contact the
sender by reply e-mail and delete the original and any copies from your
system.










--
Samisa Abeysinghe
Director, Engineering - WSO2 Inc.

http://www.wso2.com/ - "The Open Source SOA Company"

Reply | Threaded
Open this post in threaded view
|

Re: using faults w/ wsdl2c

Selvaratnam Uthaiyashankar
Hi Sam,

You can take the checkout from
https://svn.apache.org/repos/asf/webservices/axis2/trunk/java/

Regards,
Shankar

On Fri, Feb 12, 2010 at 9:30 AM, Sam Carleton <[hidden email]> wrote:

> Ok, I am trying to figure out to use faults with Axis2/C.  There was a
> thread back in December that said there is some new features in the "latest
> axis2 WSDL2C generator code".  Is my understanding that on this mailing list
> when folks refer to axis2, they mean axis2/java not axis2/c, correct?
> At this time are there binaries for the latest axis2 WSDL2C generator code
> or does one still need to go to the nightly build to get it?
> It looks to me like the nightly build can be found in the following SVN
> repository:
> http://svn.apache.org/viewvc/webservices/axis2/trunk/java/
> When I try to use TortoiseSVN 1.6.1 to check out the code, I get the
> following error:
> Repository moved permanently to '/viewvc/webservices/axis2/trunk/java/';
> please relocate
> Any thoughts on what the problem is?
> Sam
> On Tue, Dec 15, 2009 at 3:32 PM, Dimuthu Gamage <[hidden email]> wrote:
>>
>>
>> On Sat, Dec 5, 2009 at 5:56 AM, Samisa Abeysinghe <[hidden email]> wrote:
>>>
>>>
>>> On Fri, Dec 4, 2009 at 11:09 PM, Sam Carleton <[hidden email]>
>>> wrote:
>>>>
>>>> Dimuthu,
>>>> Where EXACTLY does one find the latest WSDL2C code?  Is it in an build
>>>> or is it in the Axis2/Java SVN repository?
>>
>> Hi,
>>
>> In fact right now we are not maintaining an Axis2 nightly build. So you
>> have to do your own build of Axis2/Java to get the latest WSDL2C code.
>>
>> Thanks
>> Dimuthu
>>
>>>
>>> Axis2 svn.
>>> Samisa...
>>>
>>>>
>>>> Sam
>>>>
>>>> On Thu, Dec 3, 2009 at 10:57 PM, Dimuthu Gamage <[hidden email]>
>>>> wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> If you use the latest axis2 WSDL2C generator code, you don't need to
>>>>> create soap fault message manually as the generated code provide lot of
>>>>> support in generating fault message.
>>>>>
>>>>> Please have a look at this for the improved API,
>>>>> http://www.dimuthu.org/blog/2009/02/09/code-generate-custom-soap-faults-for-axis2c/
>>>>>
>>>>>
>>>>> Thanks
>>>>> Dimuthu
>>>>>
>>>>>
>>>>> On Wed, Nov 18, 2009 at 3:49 AM, Doug Price <[hidden email]>
>>>>> wrote:
>>>>>>
>>>>>> While I see that this approach allows the creation of user-defined
>>>>>> fault types, is it possible to also use it to specify the standard
>>>>>> SOAP-ENV:Fault?  I see a struct named axiom_soap_fault_t in the
>>>>>> distribution, but I can't seem to return it from the
>>>>>> axis2_svc_skel_*_on_fault() function because it requires a pointer to the
>>>>>> SOAP body to create one.  Is there some other way to return a standard SOAP
>>>>>> fault from a service?
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Doug Price
>>>>>> Research Director | Presagis
>>>>>>
>>>>>> T. +1 972 943.2433  F. +1 469 467.4564  C. +1 469 867.8399
>>>>>>
>>>>>> DISCLAIMER: This e-mail message is for the sole use of the intended
>>>>>> recipient(s) and may contain confidential and/or proprietary information. Do
>>>>>> not read, copy, or disseminate this message unless you are the addressee.
>>>>>> Any unauthorized review, use, disclosure or distribution is strictly
>>>>>> prohibited. If you have received this message in error, please contact the
>>>>>> sender by reply e-mail and delete the original and any copies from your
>>>>>> system.
>>>>>>
>>>>>> -----Original Message-----
>>>>>>
>>>>>> From: Amir Mousavizadegan [mailto:[hidden email]]
>>>>>> Sent: Tuesday, November 17, 2009 10:29 AM
>>>>>> To: Apache AXIS C User List
>>>>>> Subject: Re: using faults w/ wsdl2c
>>>>>>
>>>>>> I did not write the sample codes  nor the document,  however  in order
>>>>>> to
>>>>>> get it working, you have to change the body of the generated  code, or
>>>>>> create a replacement function as I did.
>>>>>> thx
>>>>>> Amir
>>>>>> ----- Original Message -----
>>>>>> From: "Doug Price" <[hidden email]>
>>>>>> To: "Apache AXIS C User List" <[hidden email]>
>>>>>> Sent: Tuesday, November 17, 2009 11:05 AM
>>>>>> Subject: RE: using faults w/ wsdl2c
>>>>>>
>>>>>>
>>>>>> Just what I was looking for.  Thanks so much.
>>>>>>
>>>>>> A quick follow up question on the code though.  Is there a reason that
>>>>>> axis2_svc_skel_Division_on_fault() doesn't use the adv_divFault api to
>>>>>> create the fault?
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Doug Price
>>>>>> Research Director | Presagis
>>>>>>
>>>>>> T. +1 972 943.2433  F. +1 469 467.4564  C. +1 469 867.8399
>>>>>>
>>>>>> DISCLAIMER: This e-mail message is for the sole use of the intended
>>>>>> recipient(s) and may contain confidential and/or proprietary
>>>>>> information. Do
>>>>>> not read, copy, or disseminate this message unless you are the
>>>>>> addressee.
>>>>>> Any unauthorized review, use, disclosure or distribution is strictly
>>>>>> prohibited. If you have received this message in error, please contact
>>>>>> the
>>>>>> sender by reply e-mail and delete the original and any copies from
>>>>>> your
>>>>>> system.
>>>>>>
>>>>>> -----Original Message-----
>>>>>>
>>>>>> From: Amir Mousavizadegan [mailto:[hidden email]]
>>>>>> Sent: Tuesday, November 17, 2009 7:52 AM
>>>>>> To: Apache AXIS C User List
>>>>>> Subject: Re: using faults w/ wsdl2c
>>>>>>
>>>>>> Please see attached document
>>>>>> ----- Original Message -----
>>>>>> From: "Doug Price" <[hidden email]>
>>>>>> To: <[hidden email]>
>>>>>> Sent: Monday, November 16, 2009 4:47 PM
>>>>>> Subject: using faults w/ wsdl2c
>>>>>>
>>>>>>
>>>>>> I created a simple web service w/ Axis2c using wsdl2c on a WSDL file I
>>>>>> created in Eclipse.  The default functionality of this works fine.
>>>>>>  However,
>>>>>> now I'd like to incorporate faults into my SOAP messages.  I created a
>>>>>> fault
>>>>>> type in my WSDL and wsdl2c creates the wrappers for the fault message,
>>>>>> but
>>>>>> the service skeleton and client stubs files seem to hard coded to
>>>>>> assume no
>>>>>> faults are ever sent / received.  For example, the client
>>>>>> axis2_stub_op_*()
>>>>>> function takes my request message type and returns my response message
>>>>>> type,
>>>>>> but doesn't seem to account for my fault type.  Modifying the code, I
>>>>>> can
>>>>>> see that the fault is received and correctly deserialized, but I'll
>>>>>> have to
>>>>>> continually hand edit the axis2_stub*.c and my client.c file as I make
>>>>>> modifications to my WSDL in order to make this work.
>>>>>>
>>>>>> The same is true on the service side w/ the axis2_skel*() functions.
>>>>>>  Am I
>>>>>> missing something here, or are faults not supported w/ wsdl2c?
>>>>>>
>>>>>> --
>>>>>> Doug Price
>>>>>> Research Director | Presagis
>>>>>>
>>>>>> T. +1 972 943.2433 F. +1 469 467.4564 C. +1 469 867.8399
>>>>>>
>>>>>> DISCLAIMER: This e-mail message is for the sole use of the intended
>>>>>> recipient(s) and may contain confidential and/or proprietary
>>>>>> information. Do
>>>>>> not read, copy, or disseminate this message unless you are the
>>>>>> addressee.
>>>>>> Any unauthorized review, use, disclosure or distribution is strictly
>>>>>> prohibited. If you have received this message in error, please contact
>>>>>> the
>>>>>> sender by reply e-mail and delete the original and any copies from
>>>>>> your
>>>>>> system.
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Thanks,
>>>>> Dimuthu Gamage
>>>>>
>>>>> http://www.dimuthu.org
>>>>> http://www.wso2.org
>>>>
>>>
>>>
>>>
>>> --
>>> Samisa Abeysinghe
>>> Director, Engineering - WSO2 Inc.
>>>
>>> http://www.wso2.com/ - "The Open Source SOA Company"
>>
>>
>>
>> --
>> Thanks,
>> Dimuthu Gamage
>>
>> http://www.dimuthu.org
>> http://www.wso2.org
>
>



--
S.Uthaiyashankar
Software Architect
WSO2 Inc.
http://wso2.com/ - "lean . enterprise . middleware"
Reply | Threaded
Open this post in threaded view
|

Re: using faults w/ wsdl2c

Sam Carleton
Shankar,

Thank you.  I was wondering:

It is my understanding that when folks on this mailing list refer to
axis2, they mean axis2/java not axis2/c.  Is this a correct statement?

Sam

On Fri, Feb 12, 2010 at 2:23 AM, Selvaratnam Uthaiyashankar
<[hidden email]> wrote:

> Hi Sam,
>
> You can take the checkout from
> https://svn.apache.org/repos/asf/webservices/axis2/trunk/java/
>
> Regards,
> Shankar
>
> On Fri, Feb 12, 2010 at 9:30 AM, Sam Carleton <[hidden email]> wrote:
>> Ok, I am trying to figure out to use faults with Axis2/C.  There was a
>> thread back in December that said there is some new features in the "latest
>> axis2 WSDL2C generator code".  Is my understanding that on this mailing list
>> when folks refer to axis2, they mean axis2/java not axis2/c, correct?
>> At this time are there binaries for the latest axis2 WSDL2C generator code
>> or does one still need to go to the nightly build to get it?
>> It looks to me like the nightly build can be found in the following SVN
>> repository:
>> http://svn.apache.org/viewvc/webservices/axis2/trunk/java/
>> When I try to use TortoiseSVN 1.6.1 to check out the code, I get the
>> following error:
>> Repository moved permanently to '/viewvc/webservices/axis2/trunk/java/';
>> please relocate
>> Any thoughts on what the problem is?
>> Sam
>> On Tue, Dec 15, 2009 at 3:32 PM, Dimuthu Gamage <[hidden email]> wrote:
>>>
>>>
>>> On Sat, Dec 5, 2009 at 5:56 AM, Samisa Abeysinghe <[hidden email]> wrote:
>>>>
>>>>
>>>> On Fri, Dec 4, 2009 at 11:09 PM, Sam Carleton <[hidden email]>
>>>> wrote:
>>>>>
>>>>> Dimuthu,
>>>>> Where EXACTLY does one find the latest WSDL2C code?  Is it in an build
>>>>> or is it in the Axis2/Java SVN repository?
>>>
>>> Hi,
>>>
>>> In fact right now we are not maintaining an Axis2 nightly build. So you
>>> have to do your own build of Axis2/Java to get the latest WSDL2C code.
>>>
>>> Thanks
>>> Dimuthu
>>>
>>>>
>>>> Axis2 svn.
>>>> Samisa...
>>>>
>>>>>
>>>>> Sam
>>>>>
>>>>> On Thu, Dec 3, 2009 at 10:57 PM, Dimuthu Gamage <[hidden email]>
>>>>> wrote:
>>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> If you use the latest axis2 WSDL2C generator code, you don't need to
>>>>>> create soap fault message manually as the generated code provide lot of
>>>>>> support in generating fault message.
>>>>>>
>>>>>> Please have a look at this for the improved API,
>>>>>> http://www.dimuthu.org/blog/2009/02/09/code-generate-custom-soap-faults-for-axis2c/
>>>>>>
>>>>>>
>>>>>> Thanks
>>>>>> Dimuthu
>>>>>>
>>>>>>
>>>>>> On Wed, Nov 18, 2009 at 3:49 AM, Doug Price <[hidden email]>
>>>>>> wrote:
>>>>>>>
>>>>>>> While I see that this approach allows the creation of user-defined
>>>>>>> fault types, is it possible to also use it to specify the standard
>>>>>>> SOAP-ENV:Fault?  I see a struct named axiom_soap_fault_t in the
>>>>>>> distribution, but I can't seem to return it from the
>>>>>>> axis2_svc_skel_*_on_fault() function because it requires a pointer to the
>>>>>>> SOAP body to create one.  Is there some other way to return a standard SOAP
>>>>>>> fault from a service?
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Doug Price
>>>>>>> Research Director | Presagis
>>>>>>>
>>>>>>> T. +1 972 943.2433  F. +1 469 467.4564  C. +1 469 867.8399
>>>>>>>
>>>>>>> DISCLAIMER: This e-mail message is for the sole use of the intended
>>>>>>> recipient(s) and may contain confidential and/or proprietary information. Do
>>>>>>> not read, copy, or disseminate this message unless you are the addressee.
>>>>>>> Any unauthorized review, use, disclosure or distribution is strictly
>>>>>>> prohibited. If you have received this message in error, please contact the
>>>>>>> sender by reply e-mail and delete the original and any copies from your
>>>>>>> system.
>>>>>>>
>>>>>>> -----Original Message-----
>>>>>>>
>>>>>>> From: Amir Mousavizadegan [mailto:[hidden email]]
>>>>>>> Sent: Tuesday, November 17, 2009 10:29 AM
>>>>>>> To: Apache AXIS C User List
>>>>>>> Subject: Re: using faults w/ wsdl2c
>>>>>>>
>>>>>>> I did not write the sample codes  nor the document,  however  in order
>>>>>>> to
>>>>>>> get it working, you have to change the body of the generated  code, or
>>>>>>> create a replacement function as I did.
>>>>>>> thx
>>>>>>> Amir
>>>>>>> ----- Original Message -----
>>>>>>> From: "Doug Price" <[hidden email]>
>>>>>>> To: "Apache AXIS C User List" <[hidden email]>
>>>>>>> Sent: Tuesday, November 17, 2009 11:05 AM
>>>>>>> Subject: RE: using faults w/ wsdl2c
>>>>>>>
>>>>>>>
>>>>>>> Just what I was looking for.  Thanks so much.
>>>>>>>
>>>>>>> A quick follow up question on the code though.  Is there a reason that
>>>>>>> axis2_svc_skel_Division_on_fault() doesn't use the adv_divFault api to
>>>>>>> create the fault?
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Doug Price
>>>>>>> Research Director | Presagis
>>>>>>>
>>>>>>> T. +1 972 943.2433  F. +1 469 467.4564  C. +1 469 867.8399
>>>>>>>
>>>>>>> DISCLAIMER: This e-mail message is for the sole use of the intended
>>>>>>> recipient(s) and may contain confidential and/or proprietary
>>>>>>> information. Do
>>>>>>> not read, copy, or disseminate this message unless you are the
>>>>>>> addressee.
>>>>>>> Any unauthorized review, use, disclosure or distribution is strictly
>>>>>>> prohibited. If you have received this message in error, please contact
>>>>>>> the
>>>>>>> sender by reply e-mail and delete the original and any copies from
>>>>>>> your
>>>>>>> system.
>>>>>>>
>>>>>>> -----Original Message-----
>>>>>>>
>>>>>>> From: Amir Mousavizadegan [mailto:[hidden email]]
>>>>>>> Sent: Tuesday, November 17, 2009 7:52 AM
>>>>>>> To: Apache AXIS C User List
>>>>>>> Subject: Re: using faults w/ wsdl2c
>>>>>>>
>>>>>>> Please see attached document
>>>>>>> ----- Original Message -----
>>>>>>> From: "Doug Price" <[hidden email]>
>>>>>>> To: <[hidden email]>
>>>>>>> Sent: Monday, November 16, 2009 4:47 PM
>>>>>>> Subject: using faults w/ wsdl2c
>>>>>>>
>>>>>>>
>>>>>>> I created a simple web service w/ Axis2c using wsdl2c on a WSDL file I
>>>>>>> created in Eclipse.  The default functionality of this works fine.
>>>>>>>  However,
>>>>>>> now I'd like to incorporate faults into my SOAP messages.  I created a
>>>>>>> fault
>>>>>>> type in my WSDL and wsdl2c creates the wrappers for the fault message,
>>>>>>> but
>>>>>>> the service skeleton and client stubs files seem to hard coded to
>>>>>>> assume no
>>>>>>> faults are ever sent / received.  For example, the client
>>>>>>> axis2_stub_op_*()
>>>>>>> function takes my request message type and returns my response message
>>>>>>> type,
>>>>>>> but doesn't seem to account for my fault type.  Modifying the code, I
>>>>>>> can
>>>>>>> see that the fault is received and correctly deserialized, but I'll
>>>>>>> have to
>>>>>>> continually hand edit the axis2_stub*.c and my client.c file as I make
>>>>>>> modifications to my WSDL in order to make this work.
>>>>>>>
>>>>>>> The same is true on the service side w/ the axis2_skel*() functions.
>>>>>>>  Am I
>>>>>>> missing something here, or are faults not supported w/ wsdl2c?
>>>>>>>
>>>>>>> --
>>>>>>> Doug Price
>>>>>>> Research Director | Presagis
>>>>>>>
>>>>>>> T. +1 972 943.2433 F. +1 469 467.4564 C. +1 469 867.8399
>>>>>>>
>>>>>>> DISCLAIMER: This e-mail message is for the sole use of the intended
>>>>>>> recipient(s) and may contain confidential and/or proprietary
>>>>>>> information. Do
>>>>>>> not read, copy, or disseminate this message unless you are the
>>>>>>> addressee.
>>>>>>> Any unauthorized review, use, disclosure or distribution is strictly
>>>>>>> prohibited. If you have received this message in error, please contact
>>>>>>> the
>>>>>>> sender by reply e-mail and delete the original and any copies from
>>>>>>> your
>>>>>>> system.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Thanks,
>>>>>> Dimuthu Gamage
>>>>>>
>>>>>> http://www.dimuthu.org
>>>>>> http://www.wso2.org
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Samisa Abeysinghe
>>>> Director, Engineering - WSO2 Inc.
>>>>
>>>> http://www.wso2.com/ - "The Open Source SOA Company"
>>>
>>>
>>>
>>> --
>>> Thanks,
>>> Dimuthu Gamage
>>>
>>> http://www.dimuthu.org
>>> http://www.wso2.org
>>
>>
>
>
>
> --
> S.Uthaiyashankar
> Software Architect
> WSO2 Inc.
> http://wso2.com/ - "lean . enterprise . middleware"
>
Reply | Threaded
Open this post in threaded view
|

Re: using faults w/ wsdl2c

Selvaratnam Uthaiyashankar
On Sat, Feb 13, 2010 at 12:07 AM, Sam Carleton <[hidden email]> wrote:
> Shankar,
>
> Thank you.  I was wondering:
>
> It is my understanding that when folks on this mailing list refer to
> axis2, they mean axis2/java not axis2/c.  Is this a correct statement?


Yes, generally when someone mentions Axis2, they mean Axis2/Java. But
in this mailing list, some users use Axis2 to mean Axis2/C. We
normally interpret what is meant by Axis2, by using the context of the
discussion

Regards,
Shankar


>
> Sam
>
> On Fri, Feb 12, 2010 at 2:23 AM, Selvaratnam Uthaiyashankar
> <[hidden email]> wrote:
>> Hi Sam,
>>
>> You can take the checkout from
>> https://svn.apache.org/repos/asf/webservices/axis2/trunk/java/
>>
>> Regards,
>> Shankar
>>
>> On Fri, Feb 12, 2010 at 9:30 AM, Sam Carleton <[hidden email]> wrote:
>>> Ok, I am trying to figure out to use faults with Axis2/C.  There was a
>>> thread back in December that said there is some new features in the "latest
>>> axis2 WSDL2C generator code".  Is my understanding that on this mailing list
>>> when folks refer to axis2, they mean axis2/java not axis2/c, correct?
>>> At this time are there binaries for the latest axis2 WSDL2C generator code
>>> or does one still need to go to the nightly build to get it?
>>> It looks to me like the nightly build can be found in the following SVN
>>> repository:
>>> http://svn.apache.org/viewvc/webservices/axis2/trunk/java/
>>> When I try to use TortoiseSVN 1.6.1 to check out the code, I get the
>>> following error:
>>> Repository moved permanently to '/viewvc/webservices/axis2/trunk/java/';
>>> please relocate
>>> Any thoughts on what the problem is?
>>> Sam
>>> On Tue, Dec 15, 2009 at 3:32 PM, Dimuthu Gamage <[hidden email]> wrote:
>>>>
>>>>
>>>> On Sat, Dec 5, 2009 at 5:56 AM, Samisa Abeysinghe <[hidden email]> wrote:
>>>>>
>>>>>
>>>>> On Fri, Dec 4, 2009 at 11:09 PM, Sam Carleton <[hidden email]>
>>>>> wrote:
>>>>>>
>>>>>> Dimuthu,
>>>>>> Where EXACTLY does one find the latest WSDL2C code?  Is it in an build
>>>>>> or is it in the Axis2/Java SVN repository?
>>>>
>>>> Hi,
>>>>
>>>> In fact right now we are not maintaining an Axis2 nightly build. So you
>>>> have to do your own build of Axis2/Java to get the latest WSDL2C code.
>>>>
>>>> Thanks
>>>> Dimuthu
>>>>
>>>>>
>>>>> Axis2 svn.
>>>>> Samisa...
>>>>>
>>>>>>
>>>>>> Sam
>>>>>>
>>>>>> On Thu, Dec 3, 2009 at 10:57 PM, Dimuthu Gamage <[hidden email]>
>>>>>> wrote:
>>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> If you use the latest axis2 WSDL2C generator code, you don't need to
>>>>>>> create soap fault message manually as the generated code provide lot of
>>>>>>> support in generating fault message.
>>>>>>>
>>>>>>> Please have a look at this for the improved API,
>>>>>>> http://www.dimuthu.org/blog/2009/02/09/code-generate-custom-soap-faults-for-axis2c/
>>>>>>>
>>>>>>>
>>>>>>> Thanks
>>>>>>> Dimuthu
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Nov 18, 2009 at 3:49 AM, Doug Price <[hidden email]>
>>>>>>> wrote:
>>>>>>>>
>>>>>>>> While I see that this approach allows the creation of user-defined
>>>>>>>> fault types, is it possible to also use it to specify the standard
>>>>>>>> SOAP-ENV:Fault?  I see a struct named axiom_soap_fault_t in the
>>>>>>>> distribution, but I can't seem to return it from the
>>>>>>>> axis2_svc_skel_*_on_fault() function because it requires a pointer to the
>>>>>>>> SOAP body to create one.  Is there some other way to return a standard SOAP
>>>>>>>> fault from a service?
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Doug Price
>>>>>>>> Research Director | Presagis
>>>>>>>>
>>>>>>>> T. +1 972 943.2433  F. +1 469 467.4564  C. +1 469 867.8399
>>>>>>>>
>>>>>>>> DISCLAIMER: This e-mail message is for the sole use of the intended
>>>>>>>> recipient(s) and may contain confidential and/or proprietary information. Do
>>>>>>>> not read, copy, or disseminate this message unless you are the addressee.
>>>>>>>> Any unauthorized review, use, disclosure or distribution is strictly
>>>>>>>> prohibited. If you have received this message in error, please contact the
>>>>>>>> sender by reply e-mail and delete the original and any copies from your
>>>>>>>> system.
>>>>>>>>
>>>>>>>> -----Original Message-----
>>>>>>>>
>>>>>>>> From: Amir Mousavizadegan [mailto:[hidden email]]
>>>>>>>> Sent: Tuesday, November 17, 2009 10:29 AM
>>>>>>>> To: Apache AXIS C User List
>>>>>>>> Subject: Re: using faults w/ wsdl2c
>>>>>>>>
>>>>>>>> I did not write the sample codes  nor the document,  however  in order
>>>>>>>> to
>>>>>>>> get it working, you have to change the body of the generated  code, or
>>>>>>>> create a replacement function as I did.
>>>>>>>> thx
>>>>>>>> Amir
>>>>>>>> ----- Original Message -----
>>>>>>>> From: "Doug Price" <[hidden email]>
>>>>>>>> To: "Apache AXIS C User List" <[hidden email]>
>>>>>>>> Sent: Tuesday, November 17, 2009 11:05 AM
>>>>>>>> Subject: RE: using faults w/ wsdl2c
>>>>>>>>
>>>>>>>>
>>>>>>>> Just what I was looking for.  Thanks so much.
>>>>>>>>
>>>>>>>> A quick follow up question on the code though.  Is there a reason that
>>>>>>>> axis2_svc_skel_Division_on_fault() doesn't use the adv_divFault api to
>>>>>>>> create the fault?
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Doug Price
>>>>>>>> Research Director | Presagis
>>>>>>>>
>>>>>>>> T. +1 972 943.2433  F. +1 469 467.4564  C. +1 469 867.8399
>>>>>>>>
>>>>>>>> DISCLAIMER: This e-mail message is for the sole use of the intended
>>>>>>>> recipient(s) and may contain confidential and/or proprietary
>>>>>>>> information. Do
>>>>>>>> not read, copy, or disseminate this message unless you are the
>>>>>>>> addressee.
>>>>>>>> Any unauthorized review, use, disclosure or distribution is strictly
>>>>>>>> prohibited. If you have received this message in error, please contact
>>>>>>>> the
>>>>>>>> sender by reply e-mail and delete the original and any copies from
>>>>>>>> your
>>>>>>>> system.
>>>>>>>>
>>>>>>>> -----Original Message-----
>>>>>>>>
>>>>>>>> From: Amir Mousavizadegan [mailto:[hidden email]]
>>>>>>>> Sent: Tuesday, November 17, 2009 7:52 AM
>>>>>>>> To: Apache AXIS C User List
>>>>>>>> Subject: Re: using faults w/ wsdl2c
>>>>>>>>
>>>>>>>> Please see attached document
>>>>>>>> ----- Original Message -----
>>>>>>>> From: "Doug Price" <[hidden email]>
>>>>>>>> To: <[hidden email]>
>>>>>>>> Sent: Monday, November 16, 2009 4:47 PM
>>>>>>>> Subject: using faults w/ wsdl2c
>>>>>>>>
>>>>>>>>
>>>>>>>> I created a simple web service w/ Axis2c using wsdl2c on a WSDL file I
>>>>>>>> created in Eclipse.  The default functionality of this works fine.
>>>>>>>>  However,
>>>>>>>> now I'd like to incorporate faults into my SOAP messages.  I created a
>>>>>>>> fault
>>>>>>>> type in my WSDL and wsdl2c creates the wrappers for the fault message,
>>>>>>>> but
>>>>>>>> the service skeleton and client stubs files seem to hard coded to
>>>>>>>> assume no
>>>>>>>> faults are ever sent / received.  For example, the client
>>>>>>>> axis2_stub_op_*()
>>>>>>>> function takes my request message type and returns my response message
>>>>>>>> type,
>>>>>>>> but doesn't seem to account for my fault type.  Modifying the code, I
>>>>>>>> can
>>>>>>>> see that the fault is received and correctly deserialized, but I'll
>>>>>>>> have to
>>>>>>>> continually hand edit the axis2_stub*.c and my client.c file as I make
>>>>>>>> modifications to my WSDL in order to make this work.
>>>>>>>>
>>>>>>>> The same is true on the service side w/ the axis2_skel*() functions.
>>>>>>>>  Am I
>>>>>>>> missing something here, or are faults not supported w/ wsdl2c?
>>>>>>>>
>>>>>>>> --
>>>>>>>> Doug Price
>>>>>>>> Research Director | Presagis
>>>>>>>>
>>>>>>>> T. +1 972 943.2433 F. +1 469 467.4564 C. +1 469 867.8399
>>>>>>>>
>>>>>>>> DISCLAIMER: This e-mail message is for the sole use of the intended
>>>>>>>> recipient(s) and may contain confidential and/or proprietary
>>>>>>>> information. Do
>>>>>>>> not read, copy, or disseminate this message unless you are the
>>>>>>>> addressee.
>>>>>>>> Any unauthorized review, use, disclosure or distribution is strictly
>>>>>>>> prohibited. If you have received this message in error, please contact
>>>>>>>> the
>>>>>>>> sender by reply e-mail and delete the original and any copies from
>>>>>>>> your
>>>>>>>> system.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Thanks,
>>>>>>> Dimuthu Gamage
>>>>>>>
>>>>>>> http://www.dimuthu.org
>>>>>>> http://www.wso2.org
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Samisa Abeysinghe
>>>>> Director, Engineering - WSO2 Inc.
>>>>>
>>>>> http://www.wso2.com/ - "The Open Source SOA Company"
>>>>
>>>>
>>>>
>>>> --
>>>> Thanks,
>>>> Dimuthu Gamage
>>>>
>>>> http://www.dimuthu.org
>>>> http://www.wso2.org
>>>
>>>
>>
>>
>>
>> --
>> S.Uthaiyashankar
>> Software Architect
>> WSO2 Inc.
>> http://wso2.com/ - "lean . enterprise . middleware"
>>
>



--
S.Uthaiyashankar
Software Architect
WSO2 Inc.
http://wso2.com/ - "lean . enterprise . middleware"